alumina sheets
BRAND: SPECIAL ALUMINUM
Person in charge:Byron
Tel: +86-18538303430
Loading Port : Tianjin/Qingdao,China
Payment Terms : L/C,D/P,T/T
Delivery Time : Within 15-30 Days
E-mail: guojianbin@mingtai-al.com
Alumina sheets introduction
The alumina sheets produced by Mingtai involves 1 series, 3 series and 5 series, mainly including 1050, 1100, 3003, 5052 and 5083. Mingtai can produce and process thickness ranging from 0.2mm to 7.0mm, and the width range is 30mm-2650mm, various types of alumina sheets with lengths ranging from 400mm to 8000mm, the alumina plates produced are good in adsorption and can be colored and sealed. Due to alumina sheets's good wear resistance, high hardness and strong corrosion resistance, alumina sheets has good stress corrosion cracking ability and is not easily oxidized. It is often used in rail transportation, automobile vehicles, ship transportation, electronic appliances, construction and engineering molds.
The so-called alumina plates are all anodized aluminum plates, and the anodized aluminum plate is placed in a corresponding electrolyte to perform electrolysis under specific conditions and an applied current. The anodized aluminum plate has improved hardness and wear resistance, has good heat resistance, and enhances corrosion resistance.
The performance advantages of alumina sheets produced by Mingtai:
A: Alumina sheets has good plasticity, easy to form, and good processing performance.
B: Alumina sheets has excellent corrosion resistance, no discoloration, no corrosion, no oxidation, no rust in the long term.
C: The alumina sheets has a strong texture and excellent scratch and tensile properties.
D: alumina sheets has wide use, adaptability, flatness, no obvious defects.
Alumina sheets technical parameters
|
Alloy series |
1 series |
3 series |
5 series |
|
Typical alloy |
1050 alloy, 1060 alloy, 1070 alloy, 1100 alloy |
3003 alloy, 3004 alloy, 3005 alloy |
5005 alloy, 5052 alloy, 5083 alloy, 5086 alloy, 5182 alloy,5251 alloy |
|
Material status |
O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38 |
||
|
Thickness (mm) |
0.2-7.0 |
||
|
Width (mm) |
30-2650 |
||
|
Length (mm) |
400-8000 |
||
