1050 aluminum sheet manufacturer-Mingtai Aluminum
Pure aluminum has low strength, but has excellent formability, surface treatment, weldability, and corrosion resistance. The 1050 aluminum sheet is also part of the pure aluminum sheet series, which is close to the chemical composition and mechanical properties of the 1060 series.
1050 series alloy introduction
The 1050 series alloy must have an aluminum content of 99.5% above which is a qualified product. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is the most commonly used series in the conventional industry. 1050 aluminum sheet has high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity, but its strength is low, it is not strengthened by heat treatment, its machinability is not good, and it can accept contact welding and gas welding. More advantages of 1050 aluminum alloy are used to manufacture some structural parts with specific properties, such as gaskets and capacitors made of 1050 aluminum alloy, sheaths for electronic tubes, protective sleeves for wires and cables, nets, cores and aircraft ventilation system parts and decorative parts.
1050 aluminum sheet features:
The 1050 aluminum sheet can not be heat-treated and strengthened, and the strength can be improved by cold deformation. The only heat treatment form is annealing. The recrystallization starting temperature is related to the impurity content and deformation degree, and is generally around 200 °C. The 1050 aluminum sheet is annealed and further 60% to 80% cold deformed. Although it can be increased to 150-180 MPa, the enthalpy value drops to 1% to 1.5%. Increasing the iron and silicon impurity content in the 1050 aluminum sheet can increase the strength, but reduce the plasticity, electrical conductivity and corrosion resistance. The mechanical properties of the 1050 aluminum sheet can be obtained by adjusting the annealing temperature after cold deformation or controlling the cold deformation after annealing.
1050 aluminum sheet manufacturer
Mingtai Aluminum is a famous 1050 aluminum sheet manufacturer. Its 1050 aluminum sheet is often used in daily necessities, lighting fixtures, reflectors, decorations, chemical industrial containers, heat sinks, signs, electronics, lamps, nameplates, electrical appliances, stampings. And other products. At the same time, 1050 aluminum sheet is also used in some places where high corrosion resistance and formability are required, and it is commonly used in chemical equipment.
- 1100 aluminum sheet supplier-Mingtai Aluminum
- Application of 8021 aluminum foil on food packaging
- Curtain wall aluminum composite panel thickness
- hydrophilic aluminum foil-Mingtai Aluminum
- How much is price of air conditioner aluminum foil
- 3003 aluminum honeycomb foil required for construction-Mingtai Aluminum
- 1235 O-state aluminum foil for labeling
- Electronic Aluminum Foil Supplier-Mingtai Aluminum