1235 tape aluminum foil is widely used

- 2019-09-25 -

Aluminum foil for tape is an aluminum foil tape commonly used in electronic products. Aluminum foil tape is usually used in 1235 aluminum alloy foil, widely used in refrigerators, airborne, automotive, petrochemical, bridges, hotels, gas stoves, ventilation pipes, electronics and other industries. It can be used in mobile phones, PDAs, PDPs, LCD monitors, notebook computers, copiers and other electronic products where electromagnetic shielding is required.

Tape aluminum foil with 1235 alloy and 8011 alloy

The tape foil alloys commonly used in the industry are 1235 tape aluminum foil and 8011 tape aluminum foil, which can be subdivided into soft and hard states, single-sided and double-sided. Production processes vary according to different performance requirements. First, the aluminum foil 1235 aluminum foil is different from the 8011 aluminum foil alloy. The difference in process is that the annealing temperature is different. The annealing temperature of 1235 aluminum foil is lower than that of 8011 aluminum foil, but the annealing time is basically the same. The difference between the finished aluminum foil tape 1235 aluminum foil and the 8011 aluminum foil is slightly different. The tensile strength of the 8011 aluminum foil is higher than the tensile strength of the 1235 aluminum foil. At the same time, the elongation of the 8011 aluminum foil is not much different from that of the 1235 aluminum foil. Higher.

tape aluminum foil

Understand the production process of 1235 tape aluminum foil

1235 tape aluminum foil is divided into soft and hard state, namely H18 and O state. The hard aluminum foil tape production process does not require annealing, but sometimes it requires baking oil. The soft aluminum foil tape needs to be annealed to make it soft. There are more aluminum foil tapes on the market using 1235/O alloys. 1235 aluminum foil can also be divided into single-sided light and double-sided light, and single-sided light generally needs to be bright and outward. The production process of single-sided light is more complicated, mainly in the rolling process. Single-sided light needs to open, split, and roll the finished product, and the roll needs to be changed several times; the rolling process of double-sided light is relatively simple. The thick material can directly open the blank to the finished product without changing the roll. If it is a thin material, the roll needs to be replaced, and the production process is long.

1235 aluminum foil tape

1235 tape foil is made of high-quality pressure-sensitive adhesive, which has good adhesiveness, strong adhesion, airtightness, anti-aging and good insulation performance. Therefore, it is normal to use a wide range of aluminum foil tapes.

Contact Us

* Email
Phone No.
* Message